Crusader Basic

The Crusader Basic series of Commercial Water Softeners are suitable for applications up to 135,000 grains of hardness reduction capacity at peak flow rates of up to 34 gpm.
Operation of the Softener
Hard water contains dissolved minerals in the form of Calcium (Ca), Magnesium (Mg), Iron (Fe), Copper (Cu) & Zinc (Zn). Reduction of these contaminants is accomplished by softening the water through an ion exchange process. As water flows through the mineral tank, the dissolved minerals become attached onto and inside the resin. Over a period of time the resin will become saturated with contaminants, and the softener will require regeneration using a sodium or potassium brine solution.
Softening Media – AquaPro 500-1 Hybrid
The exchange media is a high quality, FDA certified, commercial grade strong acid (Cation)
Functional Matrix resin with a very high whole bead count, no color throw, physically hard, and
is moderately chlorine resistant. The media combines high operating capacity with excellent
chemical and physical stability for a long dependable life.
Controller/Meter
Regeneration of the system is initiated by a simplified digital controller, which electronically meters softened water flow and makes decisions to regenerate based on water consumption and program settings. Salt dosage is controlled fractionally to maximize efficiency.
Regeneration
These softener models are controlled electronically. A fully programmable microprocessor controls Tank Fill, Percolation, Ion Exchange, Backwash, Rapid Rinse and return to service cycles.
Control Valve
A hydraulically balanced, Teflon coated piston slides effortlessly through seals & spacers. All parts in the waterway are either Teflon coated brass or composite Noryl® materials for a long and reliable service life.
Resin Tank
All softener models feature a non-corrosive fiberglass tank, with a one piece thermoplastic inner liner. The tank has a maximum working pressure of 90 psi and a working temperature up to 120°F. The tank is approved by NSF, UL, FDA, and meets WQA Standard S-100. All fiberglass tanks carry a limited lifetime warranty.
Brine Tank
A high capacity brine tank is included as part of the system. The brine tank is a combination brine maker and salt storage vessel and is made of tough, high-density polyethylene. Larger tanks are available for extra salt storage capacity, if required.
Brine System
Brine refill is automatically controlled by the computer to provide the exact amount of brine for each regeneration. The Brine System has a float and safety valve shut-off, which minimizes the chance of overflowing the brine tank. All units are equipped with an air check.
ProGuard & ProGuard Plus
A ProGuard reservoir is included with this system to ensure peak performance and maximum protection from inorganic metals and minerals while maximizing system efficiency.

Peak Flow Rate

CS-B-35: 25
CS-B-50: 33
CS-B-72: 34
CS-B-100: 34
CS-B-135: 34